Multi-Agent Systems: Orchestration for Decision-Makers

A multi-agent system is a group of specialized AI agents that jointly produce a business result, in sequence or in parallel, coordinated by an orchestration layer with fixed rules. Each agent takes on a defined task, such as research or review. For the executive team this is an organizational question with a technical implementation: whoever puts such a system into operation sets the division of tasks and responsibilities and decides who signs off results, exactly as with a team of people.
When does a group of agents achieve more than a single agent?
A group of agents achieves more as soon as a process touches several areas of expertise and each sub-step has its own checkable output. A single agent works with one model, one set of instructions and a limited set of tools. That is sufficient for clearly defined tasks, such as summarizing a document. Once a process touches several areas of expertise, the instruction text grows long and the behavior becomes hard to test. It then becomes difficult to say which part of the instructions caused a particular result.
A multi-agent system solves this through specialization. One agent prepares the input data and a second assesses it against domain rules. A third drafts the decision paper and a fourth checks it against the requirements. Each agent receives a narrow brief with its own acceptance criteria. This makes behavior testable, and a change stays confined to one component.
The price is coordination effort. Every handover between two agents is an interface that has to be defined and monitored in operation. Orchestration is the layer that governs these interfaces. It fixes the sequence and the handovers, and it determines when a run is repeated and when a person takes over. A research team at the University of California, Berkeley analyzed more than 1,600 execution traces from seven open-source multi-agent frameworks. It assigns the observed failures to 14 failure modes in three groups. The first concerns unclear specifications, the second the alignment between agents, the third missing verification of results. All three groups are questions of design that can be settled before building.
Where a multi-agent system is used in a high-risk area under the AI Act, the regulation requires effective human oversight; the autonomy levels further below are the tool for setting it per step. This article provides an overview and does not constitute legal advice.
Three basic orchestration patterns and where they fit
Three basic patterns, which can be combined, are enough to start with; parallel processing and routing come in as extensions. The choice depends on how variable the process is.
- Sequence: The agents work in a fixed order. The pattern suits processes with stable logic, such as checking incoming documents against fixed criteria.
- Supervisor: A controlling agent breaks a request down and distributes the subtasks. The pattern suits requests whose course only emerges during processing.
- Producer and reviewer: One agent creates a result, a second checks it against defined criteria and returns it for revision. If the deviation persists, a person decides.
In parallel processing, several agents work on sub-questions at the same time and a consolidation step condenses the results. In routing, a first agent classifies a request and hands it directly to the responsible specialist.
The sequence is the easiest to test and to run, the supervisor the most flexible. The producer-and-reviewer pattern raises reliability where an error is expensive. The recommended order is to start with the sequence, add a review stage, and introduce a supervisor only when the variance of requests requires it. This keeps the number of interfaces small while the benefit is still unproven.
For an assessment of what individual agents achieve today, see the article AI agents: what they can do and where they stand.
Examples of multi-agent systems in companies
Typical fields of use are high-volume processes with clear domain rules and a checkable end result. Three set-ups show how the patterns come together in practice.
Invoice checking: One agent reads incoming invoices and extracts the line items. A second matches them against purchase order and goods receipt, a third checks the mandatory tax details. Deviations above a set tolerance go to accounts payable. This is a sequence with a review stage, and the metric is the share of invoices released without manual intervention.
Quote preparation in sales: One agent analyses the customer inquiry, a second assembles suitable products and terms from the catalog, a third drafts the quote. A reviewer checks prices and discounts against the approval rules. Sales decides on release. The metric is the time from inquiry to quote sent.
Claims handling in insurance: A routing agent assigns the claim to a line of business. Specialized agents check cover and the plausibility of the documents in parallel, and a consolidation step prepares the decision paper. Settlement stays with the claims handler as long as the system works at level 1 or 2.
Which frameworks and standards exist for multi-agent systems?
Mature open-source frameworks are available for building, and two open protocols for connecting tools and other agents. Widely used frameworks include LangGraph from the LangChain ecosystem, which models processes as a stateful graph, CrewAI, which describes agents as a team with roles, and AutoGen from Microsoft Research, which is built on conversations between agents. The large model providers also offer their own toolkits.
For the executive team, the choice of framework is a question of operability. Four checkpoints decide: Can runs be logged and traced in full? Can human approvals be built in at any point? Is the model interchangeable? Will your own team or operating partner master the tool in the long term?
The Model Context Protocol, MCP, standardizes how an agent accesses tools and data sources, such as an ERP system or a document store. The Agent2Agent protocol, A2A, governs how agents from different vendors hand tasks to one another. MCP originated at Anthropic, A2A at Google, and both are now developed further under the umbrella of the Linux Foundation. For your architecture this means that tool connections via MCP can be reused, and A2A reduces lock-in to a single vendor. Every new connection is also a new attack surface and needs approval from information security.
What does a multi-agent system cost to run?
Running costs result from the model calls per case, multiplied by volume, plus infrastructure, monitoring and maintenance. Every agent causes model calls, and a multi-agent system multiplies them: a multi-agent run consumes many times the tokens of a simple request. Revision loops between producer and reviewer raise consumption further.
In practice, maintenance and monitoring regularly exceed model costs once the system is in regular operation: instructions are adjusted, test cases added, deviations analyzed. This role belongs in the business case from the outset.
Five criteria for the decision
Five questions settle whether an initiative needs a multi-agent system.
- Does the process break down into steps with different domain rules?
- Does each step have an output that can be checked automatically or by a specialist?
- How strongly do the inputs vary from case to case?
- Which decisions remain with people?
- What may a run cost, measured against the value of a completed case?
The answers to the first two questions determine the architecture. The third fixes the pattern, the fourth the autonomy level and the fifth the economics. The fifth question belongs in the business case before the first prototype is built. Whoever knows the cost per completed case can weigh benefit against effort and rank the applications by value.
What the executive team has to define
Four definitions decide whether an agent system arrives in operation.
The first concerns scope: which process is covered, and which result counts as delivered? The second concerns decision rights. For every step it is settled how much an agent decides alone and when a person signs off. The third concerns metrics, such as lead time per case and the share of cases without manual intervention. The fourth concerns operation. It must be settled who changes instructions, who tests and who responds to a fault.
Ongoing operation follows its own rules for versioning, monitoring and quality assurance. The article LLMOps: running AI applications describes them in detail. The article From pilot to scale sets out the whole route from the first application to regular operation.
The route into operation with the Niehues Delivery Model
With multi-agent systems the bottleneck lies in acceptance by the business unit and in the transition to operation. The model itself is rarely the reason an initiative stalls. Niehues Consulting supports initiatives of this kind with the Niehues Delivery Model, three phases with fixed checkpoint questions.
- Understand: Business analysis and requirements, business case and sequence of applications. The guiding question: which business result is to change measurably?
- Build: Prototypes using the appropriate orchestration pattern. The guiding question: does the prototype prove the benefit in the real process with real data?
- Introduce: Handover into operation with internal or external teams, with processes, responsibilities and enablement of staff. The guiding question: who owns operation from day one?
Marin Niehues steers such initiatives as Delivery Manager or Product Owner and knows the delivery perspective from projects for VC-funded scale-ups through to DAX 40 groups, with assignments in 20+ countries on six continents. The entry point is a free initial consultation of 30 minutes, in which scope and pattern of your first agent system are clarified.
Frequently asked questions
What is the difference between an AI agent and a multi-agent system?
An AI agent handles a task with one model and its own tools, whereas a multi-agent system distributes a process across several specialized agents. These hand over their results according to fixed rules or work on sub-questions in parallel. The group pays off for processes with several areas of expertise and checkable intermediate results.
What does orchestration mean for AI agents?
Orchestration is the control layer of an agent system. It determines sequence and handovers, sets repetitions and aborts, and involves a person where needed. From the executive team's point of view it corresponds to the operating model of the system.
Which frameworks are used to build multi-agent systems?
Widely used options are LangGraph, CrewAI and AutoGen, plus toolkits from the large model providers. LangGraph models processes as a graph, CrewAI works with roles in a team, AutoGen with conversations between agents. Choose by traceability, support for human approvals, model interchangeability and the skills of your operating team.
What are MCP and A2A?
MCP and A2A are open protocols for multi-agent systems. The Model Context Protocol governs an agent's access to tools and data, the Agent2Agent protocol the handover of tasks between agents from different vendors. Both reduce integration effort and vendor lock-in.
How much does it cost to run a multi-agent system?
The cost per case consists of model calls plus a share of infrastructure, monitoring and maintenance. A multi-agent system consumes many times the tokens of a simple request, and revision loops raise consumption further. Calculate the cost per completed case before the prototype and set it against the value of the case.
What are examples of multi-agent systems in business?
Typical examples are invoice checking, quote preparation in sales and claims handling in insurance. What they share is high volume with clear domain rules. The final decision initially stays with the business unit.
When does a company need several agents instead of one?
Several agents make sense when a process touches different domain rules, each step has a checkable result and the cost per case works out in the business case. For clearly defined tasks a single agent is sufficient.
Who is responsible for the results of a multi-agent system?
Functional responsibility lies with a named role in the business unit, technical responsibility with the team that runs the system. Both are assigned per stage before the system goes into regular operation.
Let’s talk about your initiative.
In 30 minutes we clarify where your organization stands and which step will pay off most now.
Request a consultation30 minutes · free · no obligation



