# Workforce cost and performance: metrics for the executive team

Author: Marin Niehues, Niehues Consulting · Published: 2026-06-04 · Updated: 2026-11-16 · Leadership & Teams
Source: https://www.niehuesconsulting.com/blog/workforce-cost-and-performance-metrics/

The executive team manages workforce cost through metrics that relate cost to delivered results, such as cost per unit delivered or value added per full-time equivalent. The personnel cost ratio shows what the workforce costs. What it delivers becomes visible only in metrics on lead time and quality. This article provides the formulas for the key metrics, works through the employer cost of a position, places sector values in context and describes a metric set with four groups for executive reporting.

Because workforce measures touch employment law, the following applies: This article provides an overview and does not constitute legal advice.

**Workforce cost becomes manageable when every cost figure has a performance figure beside it. Only the ratio of the two shows where additional resources have an effect and where capacity is freed up.**

## A cost figure answers half the question

In service and knowledge organizations, personnel costs are the largest cost block, often half of total costs or more. The personnel cost ratio receives corresponding attention. Yet it also develops favorably when revenue rises while the organization slows down, and it deteriorates when a company deliberately invests in capacity for a new product. A single ratio therefore does not support a decision.

The executive team needs two perspectives: what work costs and what it produces in delivered results. Both belong on the same line of the report, so that every cost decision makes its effect on delivery visible. From the delivery perspective, the guiding question is how much personnel expense a result costs that reaches the customer and works there.

## How do you calculate the personnel cost ratio?

You calculate the personnel cost ratio by dividing the personnel costs of a period by the revenue of the same period and multiplying by 100.

**Formulas for the cost level**
Personnel cost ratio = personnel costs ÷ revenue × 100

Personnel costs per full-time equivalent = personnel costs ÷ average number of full-time equivalents for the year

Share of external capacity = cost of agency staff and freelancers ÷ (personnel costs + cost of agency staff and freelancers) × 100

A worked example: a company with 40 million euros in revenue and 14 million euros in personnel costs has a personnel cost ratio of 35 percent. Manufacturers often relate the ratio to total output rather than revenue, that is, revenue plus changes in inventory and own work capitalized. What matters is that the reference base stays the same across all periods.

Under the German commercial-law format of the income statement, personnel costs comprise wages and salaries as well as social security contributions and expenses for pensions and support. In detail, this means gross pay including bonuses, the employer's share of social security contributions, statutory accident insurance contributions, the statutory levies and occupational pensions. Agency work and freelancers, by contrast, sit in other operating expenses and are therefore missing from the ratio.

## What does an employee cost the employer relative to gross salary?

In Germany an employee costs the employer around 1.2 times their gross salary, as long as the salary stays below the contribution assessment ceilings. The largest surcharge is the employer's share of the four branches of social insurance, which together amount to around one fifth of gross salary. Accident insurance and statutory levies come on top.

**Worked example: employer cost of a position with a gross salary of 60,000 euros**
- Annual gross salary including bonuses: 60,000 euros
- Employer's share of social security, around one fifth: around 12,000 euros
- Accident insurance and levies, depending on the industry insurance body: around 1,000 euros
- Total employer cost: around 73,000 euros, roughly 1.2 times gross salary

Above the contribution assessment ceilings, the percentage surcharge falls because no contributions are due on the portion above them. Occupational pensions and company cars raise personnel costs further. A full-cost view per workplace adds other expenses for workspace and training, which do not appear in the personnel cost ratio.

For context: according to the German Federal Statistical Office, employers in industry and services paid an average of 43.40 euros per hour worked in 2024. This figure covers gross earnings and non-wage labor costs and serves as a benchmark for your own cost per hour.

## What is a good personnel cost ratio by sector?

A good personnel cost ratio is one that sits in the lower range for your sector while lead time and quality remain stable. The ratio follows the depth of value creation: in manufacturing with a high share of materials it is well below a quarter of revenue, while in personnel-intensive services such as consulting, IT services or care it reaches half of revenue and more. Retail with a high cost of goods sits at the lower end.

For comparison with your own sector, the cost structure survey of the German Federal Statistical Office offers the most robust basis. What counts for steering remains your own trend, read alongside lead time and quality. A ratio that rises over three years while delivery metrics stagnate is a signal for the executive team, regardless of the sector value.

## How do you calculate value added per employee?

You calculate value added per employee by deducting bought-in inputs from revenue and dividing the result by the number of full-time equivalents.

**Formulas for the productivity level**
Value added = revenue (or total output) − cost of materials − purchased services − other bought-in inputs

Value added per full-time equivalent = value added ÷ number of full-time equivalents

Personnel costs per euro of value added = personnel costs ÷ value added

A worked example: the company with 40 million euros in revenue buys in inputs worth 18 million euros and employs 200 full-time equivalents. Value added amounts to 22 million euros, or 110,000 euros per full-time equivalent. With personnel costs of 14 million euros, 64 cents of every euro of value added go to the workforce. If this value rises over several years, the room for investment and profit shrinks.

Value added per full-time equivalent is more meaningful than revenue per employee because it strips out the influence of materials and bought-in services. A company that outsources work reduces headcount and increases bought-in inputs; revenue per employee then rises, while value added per full-time equivalent shows the actual effect.

## Four metric groups for the executive team

A robust set is divided into four groups. Each answers its own question, and only together do they form a picture.

- Cost level: personnel cost ratio, personnel costs per full-time equivalent and share of external capacity. It shows what work costs.
- Productivity level: value added per full-time equivalent and the share of working time that creates customer value. It shows how much return the capacity generates.
- Delivery level: lead time, on-time delivery and quality of results. It shows what reaches the customer.
- Structure level: span of control, number of management layers and overhead share. It shows whether the organization gets work done directly or by detours.

The groups are read in pairs. A cost metric gets a counterpart from the delivery level, a structure metric a counterpart from the productivity level. If personnel costs per delivered unit fall while lead time stays stable, there is a genuine efficiency gain. If they fall while lead time rises, the organization has given up performance. If they rise while lead time falls, speed has been bought, and the executive team decides whether it is worth the price. Which delivery metrics are suitable in detail is covered in [Measuring delivery capability](/blog/delivery-capability-metrics/).

The denominator of every performance metric is a unit of output that the customer recognizes: a closed order in sales, a shipped release in development, a resolved case in service. Measurement takes place at the level of teams and processes. Comparing individuals contributes little to steering and triggers counter-reactions that distort any metric. How team performance is captured beyond utilization is described in [Measuring team performance](/blog/team-performance-metrics/).

**Three approaches to managing workforce cost**
Criterion | Cost ratio alone | Utilization rate | With Niehues Consulting
Central question | What does the workforce cost? | How busy is the workforce? | What does a result cost at the customer?
Statement about delivery | None | Indirect | Direct, via lead time and quality
Risk when cutting costs | Loss of performance remains invisible | More activity, no more results | Effect on delivery is visible before the decision
Suitability for decisions | Low | Medium | High

## Typical distortions and how the executive team avoids them

Averages conceal the spread between units. A company with a solid overall ratio can be overstaffed in one unit and at the limit of its delivery capability in another. Analysis by unit and process makes these differences visible.

External capacity sits in other operating expenses and is therefore missing from the personnel cost ratio. Building capacity internally or outsourcing it changes the ratio without the work changing. The cost level therefore reports internal and external capacity together.

Cost reduction and its consequences run with a time lag: after severance payments and notice periods, the saving appears two to four quarters later, while delays to deadlines often show earlier, as soon as knowledge holders leave. In Germany, statutory notice periods extend to up to seven months for long-serving employees. A report that shows both curves side by side makes this gap visible. How overhead can be reduced without loss of performance is shown in [Reducing overhead without losing performance](/blog/reduce-overhead-without-losing-performance/).

One page is enough for reporting: two values per metric group over time, alongside the targets and the accountable unit. Decisions are then taken where cost and performance diverge.

## Niehues Consulting as a partner for the metric system

[Niehues Consulting](/) helps executive teams turn workforce cost and performance into a steering system. The focus is on delivery management and organizational design: structures and decision paths, so that the organization delivers reliably in day-to-day business and in transformation. Marin Niehues works as a management consultant from the delivery perspective: he builds organizations that deliver and brings AI into operations. His projects range from VC-funded scale-ups to DAX 40 groups, with assignments in 20+ countries on six continents and a home base in the DACH region.

The approach follows the Niehues Delivery Model with the phases Understand, Build and Implement. Three of its test questions matter most for a metric system. In Understand: who decides, who delivers, who uses? And: what is the baseline, and how do we measure success? In Implement: which metric shows after 90 days that the solution is landing? The metrics are developed where delivery happens, together with the units that will later own them. How organizational design and delivery management work together is described in the article [characteristics and metrics of a high-performing organization](/blog/high-performing-organisation/).

The free initial consultation lasts 30 minutes; you can arrange it via the [contact form](/#kontakt).

**The metric set in brief**
The executive team reads workforce cost in pairs: cost beside delivered results, structure beside productivity. The personnel cost ratio and value added per full-time equivalent form the base, with lead time and quality as the cross-check. Measured at team and process level and reported on one page, the set shows where savings cost performance and where additional capacity delivers results.

**Sources**
- Federal Statistical Office of Germany (Destatis): Labor costs per hour worked, 2024

## Frequently asked questions

### How high should personnel costs be relative to performance?

Personnel costs should be at a level where value added per full-time equivalent grows faster over several years than personnel costs per full-time equivalent. Productivity then rises, and the share of value added that goes to the workforce remains stable or falls. What matters is your own trend, read together with lead time and quality.

### What is included in personnel costs?

Personnel costs include wages and salaries with allowances and bonuses, the employer's share of social security, accident insurance, statutory levies and occupational pensions. Agency workers and freelancers are not included and sit in other operating expenses. For steering, both cost types should be reported together.

### Which metrics belong in executive reporting?

Executive reporting needs one or two metrics from each of the four groups: the personnel cost ratio and cost per unit for the cost level, and value added per full-time equivalent for productivity. Lead time and on-time delivery cover delivery, and span of control covers structure. Cost and performance appear on the same page.

### How do you measure productivity in knowledge work?

You measure productivity in knowledge work through units of output that the customer recognizes and through lead time per unit. Measurement takes place at team and process level and over several months. Working hours alone reflect activity and allow no conclusion about impact.

### How do you measure productivity when people work from home?

You measure productivity when people work from home with the same output metrics as in the office, namely delivered units and lead time per team. Presence and on-screen activity are not suitable measures. More on this in [Measuring productivity in hybrid organizations](/blog/measuring-productivity-hybrid-organisations/).

### How can personnel costs be reduced without losing performance?

You reduce personnel costs without losing performance by starting where work creates no customer value: waiting times and duplicated coordination. Unclear decision paths also tie up capacity without results. Before each measure it is fixed which delivery metric must remain stable, and a trend over several months checks this.
