# Addressing a Skilled Labor Shortage Organisationally: Productivity Instead of Headcount

Author: Marin Niehues, Niehues Consulting · Published: 2025-10-02 · Updated: 2026-11-16 · Leadership & Teams
Source: https://www.niehuesconsulting.com/blog/skilled-labour-shortage-organisational-response/

Companies address a skilled labor shortage organisationally by raising output per specialist instead of relying on filling additional positions alone. The labor market determines how many qualified people are available. The organization determines how much result each of them produces. This article sets out the situation in Germany and describes four levers with which senior management and heads of business units can change the second variable deliberately, with a calculation, a sequence and metrics.

**Every filled position increases capacity by one person. Every bottleneck removed increases the output of everyone working in that process.**

## How severe is the skilled labor shortage in Germany?

The skilled labor shortage in Germany is structural: the Federal Employment Agency's bottleneck analysis for 2024 identifies 163 shortage occupations. It is therefore more than a question of the business cycle. Even in periods of weak demand, positions in these occupations stay open for a long time because suitable applicants are missing.

Demographics will sharpen the situation in the coming years. According to microcensus data from the Federal Statistical Office, around 13.4 million members of the labor force will reach the statutory retirement age by 2039, close to a third of the 2024 labor force. A simulation by the Institute for Employment Research (IAB) shows that, without immigration and with unchanged participation rates, the potential labor force would fall by around 7.2 million people between 2020 and 2035. Only net immigration of about 400,000 people per year would keep it constant.

**The skilled labor shortage in figures**
163 | Shortage occupations in Germany according to the Federal Employment Agency's bottleneck analysis for 2024
13.4 million | Members of the labor force reaching the statutory retirement age by 2039
7.2 million | Decline in the potential labor force by 2035 without immigration and with unchanged participation
400,000 | Annual net immigration that would keep the potential labor force constant until 2035

## What causes the skilled labor shortage?

The main cause is demographic: the baby-boom cohorts are leaving the labor market, and the following cohorts are smaller. Three further factors reinforce it. Structural change through digitalization and the energy transition raises demand for certain qualifications faster than vocational training and universities can supply them. Qualifications and requirements often do not match, so unemployment and open vacancies exist side by side. And scarcity is unevenly distributed across regions, because skilled workers relocate only to a limited extent.

## Which sectors and occupations are most affected?

Healthcare and nursing occupations as well as construction and skilled trades are most affected. According to the Federal Employment Agency, the large shortage occupations also include professional driving as well as childcare and social education. In technical fields, the shortage is concentrated among workers with vocational qualifications, for instance in electrical and energy engineering.

For companies outside these fields, the same logic applies on a smaller scale. Almost every company has two to five roles that take months to fill and whose absence slows an entire process. These roles are the starting point of the organizational response. How to identify them systematically is described in [Strategic workforce planning for three years](/blog/strategic-workforce-planning-three-year/).

## Why the hiring logic reaches its limit

Many companies respond to staff shortages with more recruiting and higher salary offers. The goal is legitimate. The measures, however, act in a market where competitors do the same. Competition for the same specialists makes hiring more expensive and, in the short term, moves people between companies without creating new ones.

The delivery perspective asks a different question. It asks whether orders and decisions reach the person who works on them without friction. In many processes, qualified specialists spend part of their time searching and coordinating, waiting for approvals or performing tasks below their qualification. This time is the capacity reserve a company can unlock. If a process is redesigned so that the same specialist gains more time for qualified work, the effect is that of an additional position: nobody has to be found or onboarded.

**Calculation: capacity without a new position**
- Formula: output of a unit equals the number of specialists times the share of time spent on core work times the result per hour of that work
- Hiring acts only on the first factor; the four levers in this article act on the other two
- Example with assumed values: 20 engineers spend 55 percent of their time on core work
- If relief raises that share to 65 percent, capacity grows by around 18 percent
- This corresponds to around 3.6 additional full-time equivalents without filling a single position

## Lever 1: Find and remove bottlenecks in the process

The throughput of a process is determined by its slowest step. This insight from the theory of constraints applies to knowledge work as much as to manufacturing. The approach consists of three moves: the value stream is mapped from order intake to delivery, processing and waiting time are recorded for each step, and the step with the longest waiting time before a scarce qualification is treated as the bottleneck. A detailed guide is offered in [Finding bottlenecks in value creation](/blog/finding-bottlenecks-in-the-value-chain/).

In practice, three patterns occur particularly often:

- Approvals that wait for a single person, although the decision could be governed by rules
- Handovers between units where information is missing and queries arise
- Tasks performed by specialists although they require no specialist knowledge

Removing a bottleneck increases the output of the entire process without any individual working more. That is why this lever comes first.

## Lever 2: Concentrate roles on core tasks

In many organizations, scarce qualifications are tied up by secondary tasks. A role relief analysis assigns each task of a scarce role to one of three classes: the task requires exactly this role; another role can take it over with guidance; or it can be dropped or automated. When engineers format reports or coordinate appointments, that is a task of the second or third class.

The transfer requires decision rights and clear responsibilities. A task that moves to another role must arrive there with a template and a contact person, otherwise it comes back. Organization design defines which role makes which decision and thus shortens the routes on which time is lost today. How responsibilities can be settled bindingly is described in [Clarifying decision rights](/blog/decision-rights-raci-rapid/).

**Additional positions or higher productivity**
Criterion | Filling positions | Raising productivity | With Niehues Consulting
Dependence on the labor market | High, hiring follows the supply of specialists | Low, the effect arises in one's own process | Low, with a prioritized bottleneck list before the first redesign
Time to effect | Selection and notice periods plus onboarding | First effects once the first bottleneck is removed | Effect in the first unit before others follow
Effect on the workforce | Additional load until onboarding is complete | Relief for existing specialists | Relief with clarified roles and responsibilities

## How do you shorten onboarding for new specialists?

Onboarding becomes shorter when tasks, contact persons and documented knowledge are available from the first day. A new specialist reaches full effectiveness sooner the less knowledge they have to gather on their own. Documented knowledge also protects against gaps when experienced staff leave, and it gains weight with the coming wave of retirements.

## How does AI relieve scarce specialists?

AI relieves scarce specialists by taking over routines and making experience more widely available. Language models draft documents and summarize them, and pre-sorting cases can be delegated as well. A field study of more than 5,000 customer service agents shows that an AI assistant raised issues resolved per hour by around 14 percent on average and by around 34 percent among less experienced agents. For scarce roles, the second figure matters more: AI brings new staff up to the level of experienced colleagues faster.

The benefit arises when the process is adapted to the new division of labor and the business unit accepts the result. A prototype working in the real process of a department provides the evidence before a broad rollout.

The sequence of levers follows a logic. Automating a step that is not a bottleneck lowers costs at best. Only what relieves the bottleneck raises throughput. Work therefore begins with the bottleneck, continues with role relief and then moves on to knowledge and automation.

## How quickly do organizational measures take effect?

Removing a first bottleneck usually shows a measurable effect on lead time after six to twelve weeks. Relieving roles takes three to six months, because tasks are redistributed and templates are built. Better onboarding takes effect with the next cohort of hires. An AI application in the bottleneck process typically needs three to nine months from prototype to stable use. Filling a position in a shortage occupation, by contrast, often takes many months, excluding notice period and onboarding.

## How do you retain skilled workers?

Skilled workers stay when they actually use their qualification, can develop and receive support from their managers. The organizational levers in this article therefore work twice. Freeing an engineer from formatting work increases capacity and at the same time satisfaction with the job. Visible development paths, reliable leadership and working time models that reflect different life stages add to this. For older specialists in particular, flexible models extend working life and preserve experience.

**Metrics for steering the levers**
- Lead time of the bottleneck process from order to result
- Share of working time of scarce roles spent on core work
- Time for new employees to reach full effectiveness
- Voluntary turnover in scarce roles
- Share of automated routine cases in the processes under review

## Niehues Consulting as partner for the organizational response

[Niehues Consulting](/) supports senior management and heads of business units in raising output per specialist. Founder Marin Niehues builds organizations that deliver and brings AI into operations. His projects range from VC-funded scale-ups to DAX 40 corporations, with assignments in 20+ countries on six continents.

The approach follows the Niehues Delivery Model with the phases Understand, Build, Introduce. Three of its test questions matter most for the skills shortage: Which business result should change measurably? What is the baseline, and how do we measure success? Does the prototype prove its benefit in the real process with real data? Delivery management and organization design define roles and decision paths so that bottlenecks disappear and scarce qualifications stay focused on core tasks. AI management determines which applications contribute most and in which order, and calculates the business case. The overarching framework is described in the article [characteristics and metrics of a high-performing organization](/blog/high-performing-organisation/).

The entry point is a free [initial consultation](/#kontakt) of 30 minutes. It clarifies in which process the first bottleneck lies and which lever takes effect there first.

**Productivity as the answer to scarce specialists**
A company that raises its output per specialist becomes less dependent on the labor market. The sequence is: remove the bottleneck first, then relieve the roles, then knowledge and automation. Each step receives a metric and a responsible person.

**Sources**
- Federal Employment Agency (Bundesagentur für Arbeit), Statistics: Fachkräfteengpassanalyse 2024, 2025
- Federal Statistical Office of Germany (Destatis): Microcensus 2024, press release on labor force members reaching retirement age by 2039, 2025
- Fuchs, Söhnlein, Weber: Demografische Entwicklung lässt das Arbeitskräfteangebot stark schrumpfen, IAB-Kurzbericht 25/2021
- Brynjolfsson, Li, Raymond: Generative AI at Work, NBER Working Paper, 2023

## Frequently asked questions

### How can a company tackle a skills shortage?

Two routes complement each other: filling open positions and raising output per specialist. The organizational route starts with bottlenecks in the process and relieves scarce roles of secondary tasks. It speeds up onboarding and automates routines.

### How big is the skills shortage in Germany?

The Federal Employment Agency's bottleneck analysis for 2024 identified 163 shortage occupations. Around 13.4 million members of the labor force will also reach retirement age by 2039. Without immigration, the potential labor force would shrink by around 7.2 million people by 2035.

### What are the causes of the skilled labor shortage?

The main cause is demographic change, as the baby-boom cohorts retire. Structural change with new skill requirements, mismatches between qualifications and vacancies, and regional differences reinforce it.

### Which industries are most affected by skills shortages?

Healthcare and nursing as well as construction and skilled trades are most affected. Professional driving, childcare and technical occupations requiring vocational training, for instance in electrical and energy engineering, are also affected.

### How quickly do organizational measures against staff shortages work?

A removed bottleneck shows its effect on lead time after six to twelve weeks. Relieving roles takes three to six months. Both are faster than filling a position in a shortage occupation, including onboarding.

### How do you retain skilled employees?

Skilled employees stay when they use their qualification, can develop and experience good leadership. Relieving them of secondary tasks therefore improves capacity and retention at once. Development paths and flexible working time models complete the picture.

### How can productivity in knowledge work be measured?

Process metrics are meaningful: the lead time of a case, the share of time spent on core work and the time new employees need to reach full effectiveness. Utilization alone says little, because it also counts waiting time and rework as work.

### Can AI compensate for the skills shortage?

No, AI alone does not compensate for the skills shortage, yet it gives scarce specialists noticeably more time for their core work. The prerequisite is that the process is adapted and the business unit accepts the solution. That is why the bottleneck analysis comes before the choice of application.
