# Organizational Ambidexterity: Optimizing the Core Business and Building the New

Author: Marin Niehues, Niehues Consulting · Published: 2026-02-19 · Updated: 2026-11-16 · Organizational Design
Source: https://www.niehuesconsulting.com/blog/organisational-ambidexterity/

Ambidexterity is the ability of a company to run its core business efficiently while building new business areas at the same time. The two tasks follow different logics: the core business demands reliability and scale, while the new demands experiment and patience. Organizations that master only the first logic fall into the competency trap: they become ever better at what exists while shifts in technology and markets pass them by. This article describes the models of ambidexterity, criteria for choosing between them and how to steer the interface.

## The tension: exploiting and exploring

The distinction goes back to James March, who in 1991 distinguished between exploitation and exploration in the journal Organization Science. Exploitation means making the most of what exists, for example improving processes and retaining customers. Exploration means discovering the new, that is, other markets and other technologies. Both tasks compete for the same resources, namely capital and management attention.

From a delivery perspective, the risk is that an organization is built for the familiar. Its metrics and approvals reward predictability. A new initiative that enters this system is measured against the standards of the core business and loses. Ambidexterity therefore requires a deliberate decision about which logic applies where and who arbitrates when the two collide.

**Ambidexterity is a task of organization design. It results from decisions about structure and resources and needs an accountable home in the executive team.**

## What is the competency trap?

The competency trap describes the effect whereby a company becomes ever better at a proven capability and, precisely for that reason, stops trying new paths. Barbara Levitt and James March coined the term in 1988 in research on organizational learning: every improvement in the familiar makes the familiar even more attractive compared with the untried.

A related idea is the innovator's dilemma, described by Clayton Christensen in 1997. Established companies listen to their best customers and invest rationally in improving existing products. In doing so, they overlook simpler, initially less profitable offerings that enter the market from below and later attack the core business. Both concepts explain why well-run companies miss disruptive shifts: their steering rewards exactly the behavior that leads them into the trap. The risk grows with the speed at which technology and customer behavior change in the company's own market.

## Which models of ambidexterity exist?

Research recognizes three basic models for combining both logics within one organization: sequential, structural and contextual. In addition, exploration can be moved into equity stakes and partnerships, for instance through corporate venturing.

- Sequential ambidexterity: the company alternates over time between phases of optimization and phases of reorientation.
- Structural ambidexterity: the new is created in separate units that work apart from the core business and are linked by the executive team. Charles O'Reilly and Michael Tushman described this model in the Harvard Business Review in 2004.
- Contextual ambidexterity: every unit and every manager balances both tasks themselves, made possible by an environment of latitude and discipline. The model goes back to Cristina Gibson and Julian Birkinshaw (Academy of Management Journal, 2004).

The sequential variant suits markets with long, clearly recognizable cycles, such as plant engineering with product generations of ten years or more. It presupposes that a disruption is recognized in time. If the shift creeps in gradually, the change of phase comes too late. For ongoing steering, the choice is therefore usually between the structural and the contextual variants.

For the structural variant there is a well-known empirical finding. In the study by O'Reilly and Tushman, breakthrough innovation initiatives organized in ambidextrous structures achieved their goals in more than 90 percent of cases. Purely functional structures performed markedly worse, as did detached units without a link to the executive team.

**Structural and contextual ambidexterity compared**
Criterion | Structural separation | Contextual integration | With Niehues Consulting
Steering | Separate unit, linked through the executive team | Latitude within every unit | Model chosen per initiative, uniform portfolio steering
Access to core resources | Through agreements | Direct | Through fixed handover routes between units
Typical risk | Isolation of the new unit | Overload of managers | Early measurement of both risks against delivery metrics
Precondition | Clear role for the executive team | Mature leadership culture | Diagnosis of the starting point before choosing a model

## What are examples of ambidextrous companies?

Well-documented examples come from the research of O'Reilly and Tushman. The newspaper USA Today built its online offering as a separate unit and linked it to the print newsroom at senior management level. Ciba Vision developed new contact lens technologies in separate project units while the existing business continued. From 2000, IBM ran a program for Emerging Business Opportunities that managed new business areas with their own metrics and later handed successful areas over to the line organization.

Kodak is regarded as the counter-example. The company had technology for digital photography early on, yet for a long time steered it by the standards of its profitable film business. The case shows the competency trap in its purest form.

## Advantages and disadvantages of ambidexterity

The central advantage of ambidexterity is that a company builds future growth without jeopardizing the results of its core business. New areas use the customer access and brand of the core, while the core business remains undisturbed in its efficiency logic. Risk is also spread: if a new area fails, the core stays intact.

The disadvantages lie in the effort of steering. Two logics under one roof create conflicts over budget and staff that the executive team has to resolve regularly. Separate units create duplicate structures and risk becoming isolated from the core. Contextual models demand a great deal of individual managers and tip in favor of day-to-day business under pressure for results. These disadvantages are manageable when the interface has an owner.

## Criteria for choosing a model

The choice follows from four questions the organization asks itself.

- How far from the core business does the new lie? The greater the distance in customers and technology, the stronger the case for a separate unit.
- How strongly does it depend on core resources? Anyone who needs the sales force or data of the core requires fixed access routes.
- How mature is the management level? Contextual ambidexterity requires managers who can switch between both logics.
- How fast is the market changing? The shorter the cycles, the less a change of phase is enough.

The decision is preceded by a diagnosis of the starting point: where do units already work according to their own logic today, and where are they held back by common rules? The answer shows how much separation the organization needs and how much integration it can absorb.

The result is rarely a pure model. For mid-sized companies a combination has proven effective: a ring-fenced unit for a large new business area that lies far from the core, and contextual latitude for new activities that use the customers and technology of the core. Which logic applies where belongs in the [operating model](/blog/operating-model-before-structure/). How the choice of model and structure fit together is set out in the article [characteristics and metrics of a high-performing organization](/blog/high-performing-organisation/).

## How should the budget be split between the core business and the new?

A fixed ratio that the executive team sets once a year and does not renegotiate during the year has proven effective. A widely used guideline is the 70/20/10 rule: around 70 percent for the core business, 20 percent for adjacent areas and 10 percent for fundamentally new activities.

**Exhibit 1 (Schematic): Under the 70/20/10 rule, most of the budget goes to the core business**

| Part | Value | Share |
| --- | --- | --- |
| Core business | 70 | 70% |
| Adjacent areas | 20 | 20% |
| Fundamentally new | 10 | 10% |

Schematic illustration, not measured data.
Note: Widely used guideline, not a measured value
Graphic: [SVG](https://www.niehuesconsulting.com/blog/organisational-ambidexterity/grafik-1.svg) · [CSV](https://www.niehuesconsulting.com/blog/organisational-ambidexterity/grafik-1.csv) · [JSON](https://www.niehuesconsulting.com/blog/organisational-ambidexterity/grafik-1.json) · Niehues Consulting, [CC BY 4.0](https://creativecommons.org/licenses/by/4.0/deed.en)

The ratio is a starting point. Companies in markets with rapid technological change shift it towards the new; companies in stable markets shift it towards the core. What matters is the release logic: the new receives budget in stages, tied to validation milestones, while the core business is steered by return and efficiency. How budgets can be linked to value streams is described in the article on [portfolio management](/blog/portfolio-management-value-stream-budgets/).

## The interface: where ambidexterity is decided in delivery

The chosen model only takes effect when the interface between core and new is steered. Four fault lines deserve the attention of the executive team:

- Resources: the new receives budget and staff according to fixed rules that are not renegotiated every quarter.
- Metrics: the core business is measured on return and efficiency, the new on learning progress and validation milestones, for instance the number of paying pilot customers.
- Handover: a successful business area needs a defined route into the line organization, with responsibility and capacity.
- Conflicts: the executive team decides between the two worlds and does not leave this to the level below.

**Typical failure patterns at the interface**
The new unit works in isolation and delivers prototypes that nobody adopts. Or it is placed under the core business and judged by its standards. Or its resources are the first to be withdrawn when the core comes under pressure. Every pattern has the same cause: the interface has no owner.

## Niehues Consulting as a partner for ambidextrous organizations

[Niehues Consulting](/) builds organizations that deliver, in day-to-day business as well as in transformation. For ambidexterity this means delivery management and organization design for both tasks at once. The approach follows the Niehues Delivery Model with its phases Understand, Build and Introduce. Three test questions matter most here. Which business result should change measurably? Which roles, decision paths and interfaces does operation require? Who is accountable for operation from day one? The first question separates the goals of core and new, the second shapes the interface, and the third secures the handover of successful areas into the line. Where needed, Niehues Consulting takes on the role of delivery manager, project manager or product owner.

If the new is an AI application area, prototypes in the real workflow prove the value before the organization commits resources permanently. The transfer into operation then takes place with internal or external teams, and the business units take over the application.

A free 30-minute initial consultation clarifies which model suits your starting point: [book an initial consultation](/#kontakt).

**Ambidexterity as a leadership task**
A company optimizes its core business and builds the new at the same time when it decides the question of model deliberately and steers the interface between the two worlds. The executive team sets resources and metrics and defines the handover routes. It is also accountable for the conflicts between the two logics.

**Sources**
- O'Reilly, Tushman: The Ambidextrous Organization, Harvard Business Review, 2004
- March: Exploration and Exploitation in Organizational Learning, Organization Science, 1991
- Levitt, March: Organizational Learning, Annual Review of Sociology, 1988
- Gibson, Birkinshaw: The Antecedents, Consequences, and Mediating Role of Organizational Ambidexterity, Academy of Management Journal, 2004
- Christensen: The Innovator's Dilemma, Harvard Business School Press, 1997

## Frequently asked questions

### What does organizational ambidexterity mean?

Ambidexterity is the ability of an organization to run existing business efficiently while exploring the new at the same time. The term comes from organizational research and describes a design task for leadership.

### What is the difference between exploitation and exploration?

Exploitation improves and scales what already works, such as processes and products. Exploration searches for new markets and technologies and accepts uncertainty in doing so. Each requires different metrics and responsibilities.

### Which model of ambidexterity suits mid-sized companies?

For mid-sized companies a combination works best: a ring-fenced unit for a large new business area far from the core, and contextual latitude for new activities that use the customers and technology of the core. The ring-fenced unit needs an accountable owner in the executive team.

### What is sequential ambidexterity, and when does it fit?

In sequential ambidexterity a company alternates over time between phases of optimization and phases of reorientation. It fits markets with long, clearly recognizable cycles. In fast-changing markets the switch frequently comes too late.

### What are examples of ambidextrous companies?

Research documents USA Today and Ciba Vision, as well as the Emerging Business Opportunities program at IBM. All three ran new businesses in separate units and linked them to the core at senior management level. Kodak is regarded as the counter-example of the competency trap.

### What are the advantages and disadvantages of ambidexterity?

The advantage is growth in new areas with secure results in the core business. The disadvantage is the steering effort: conflicts over budget and staff as well as the risk of isolated units. A named owner of the interface limits these disadvantages.

### What is the competency trap, and how does it relate to the innovator's dilemma?

The competency trap describes companies that become ever better at what is proven and therefore neglect the new. The innovator's dilemma, after Clayton Christensen, explains how established providers overlook simpler offerings that later attack their core market.

### How should the budget be split between the core business and the new?

A common guideline is 70/20/10: 70 percent for the core business, 20 percent for adjacent areas, 10 percent for fundamentally new activities. The ratio is set annually, and the budget for the new is released in stages against milestones.

### Which metrics suit exploration?

Exploration suits learning metrics such as validated customer problems or paying pilot customers. The time until the next investment decision complements them. Revenue and margin become steering variables only after validation.
